1
/
su
4
Official Sun Visor Strip - AK47 - AbarthExtreme mod.1
Official Sun Visor Strip - AK47 - AbarthExtreme mod.1
Prezzo di listino
€59,00
Prezzo di listino
Prezzo scontato
€59,00
Prezzo unitario
/
per
Imposte incluse.
Spese di spedizione calcolate al check-out.
Impossibile caricare la disponibilità di ritiro
Sun Visor - AK47 - AbarthExtreme Official
Sun visors customizable in any color and model, CONSULT OUR LIST and then contact us for other colors from the Palette.
The base, in addition to the default MATTE BLACK, can also be requested on a GLOSSY BLACK base.
THEY ARE NOT PRINTED AND THEREFORE DO NOT FADE IN THE SUN
Made of excellent quality vinyl (lasting 5/7 years) to be mounted on your car's windshield.
THEY RESIST HAND WASHING, PRESSURE WASHERS, ROLLER WASHES.
ASSEMBLY INSTRUCTIONS:
THEY RESIST HAND WASHING, PRESSURE WASHERS, ROLLER WASHES.
ASSEMBLY INSTRUCTIONS:
- Clean the affected area thoroughly with pink alcohol;
- Let dry for a couple of seconds;
- Prepare a mixture of water and soap and pour it into a spray bottle
- Spray the soapy water on both the previously cleaned windshield and the adhesive part of the strip.
- Position the strip on the windshield (The soapy water will allow you to adjust the strip without it sticking immediately)
- Use a squeegee to push out the water between the adhesive and the windshield from the center outwards
- Use a hairdryer to dry the water faster and remove small wrinkles that form
- After the strip is firmly on the windshield, trim the excess film at the edges with a sharp utility knife blade, using the edge of the glass as a guide
- Go over the entire graphic with a hot air hairdryer to fully secure the adhesive to the windshield
- ENJOY YOUR NEW LOOK
N.B: expose the car to the sun for at least 24/48h without washing it or using brushes so that the water and soap mixture used for application dries out more.
- Let dry for a couple of seconds;
- Prepare a mixture of water and soap and pour it into a spray bottle
- Spray the soapy water on both the previously cleaned windshield and the adhesive part of the strip.
- Position the strip on the windshield (The soapy water will allow you to adjust the strip without it sticking immediately)
- Use a squeegee to push out the water between the adhesive and the windshield from the center outwards
- Use a hairdryer to dry the water faster and remove small wrinkles that form
- After the strip is firmly on the windshield, trim the excess film at the edges with a sharp utility knife blade, using the edge of the glass as a guide
- Go over the entire graphic with a hot air hairdryer to fully secure the adhesive to the windshield
- ENJOY YOUR NEW LOOK
N.B: expose the car to the sun for at least 24/48h without washing it or using brushes so that the water and soap mixture used for application dries out more.
Share
